26 May
2011
26 May
'11
4:15 p.m.
On 05/26/2011 03:57 PM, jhallett(a)mindea.com wrote:
--
Djigzo open source email encryption
No. I can successfully ping "localhost", but
nothing else; cannot ping
other equipment inside my network nor internet IPs.
Jeff
I belief you are using the Virtual Appliance for VMware
Player/Workstation? If so can you try to set the network to NAT (and
then restart)? By default it's set to bridged mode and this does not
always work with VMware.
Kind regards,
Martijn
Thanks for the responses. I tried "apt-get
. . .", but it failed
because,
of course, DNS doesn't work so the package
server(s) cannot be found.
Likewise, the Other | Update . . . feature did not work.
Like all the equipment in my home office, I set DNS to public servers at
OpenDNS, so the djigzo's DNS settings are:
DNS 1: 208.67.222.222
DNS 2: 208.67.220.220
DNS 3: [blank[
Weird. Can you ping 208.67.222.222 ?
Martijn
Jeffery Hallett/Mindea wrote on 05/26/2011 08:46:55 AM:
> From:
>
> Jeffery Hallett/Mindea
>
> To:
>
> users(a)lists.djigzo.com
>
> Date:
>
> 05/26/2011 08:46 AM
>
> Subject:
>
> Re: Newbie problem with setup
>
Thanks for the responses. I tried "apt-get
. . .", but it failed
> because, of course, DNS doesn't work so the
package server(s) cannot
> be found. Likewise, the Other | Update . . . feature did not work.
>
> Like all the equipment in my home office, I set DNS to public
> servers at OpenDNS, so the djigzo's DNS settings are:
> DNS 1: 208.67.222.222
> DNS 2: 208.67.220.220
> DNS 3: [blank[
Jeff
> On 01/-10/-28163 08:59 PM, lst_hoe02 at kwsoft.de wrote:
>> Zitat von jhallett at mindea.com:
>>
>>> Hi Martin.
>>> I downloaded and setup the VMWare image. How do I best check and
test
>>> DNS?
>>
>> Maybe "dnsutils" should be included so one can test DNS resolution
with
>> "dig"?
>
> Yes I'll do that since I had to install dnsutils more than once when
> installing the Virtual Appliance. I try to keep the Virtual Appliance
as
> clean as possible to make it more secure and
make it less likely that
> updates should be installed. dnsutils (and Telnet) however are tools
> that come handy. I will add them when the virtual appliance is updated.
>
>>
>> If you test the Appliance at Home or behind some cheap broadband
router
>> it might be the problem that some of
these devices don't support MX
>> record queries.
>>
>> You can try to install "dig" with "sudo apt-get install
dnsutils" and
>> then test the MX resolution with "dig somedomain MX".
>
> And if you need telnet (to manually test SMTP connection) you can
> install it with
>
> sudo apt-get install telnet
>
> PS. make sure you install all updates first (can be done from the
> console Other -> update
>
> Kind regards,
>
> Martijn
_______________________________________________
Users mailing list
Users(a)lists.djigzo.com
http://lists.djigzo.com/lists/listinfo/users